Fir Minor 5
Highlights
- Added support for Over-Receipt functionality in Timber
- Added totals for unit, unit volume, weights and no of parcels to reports 2.0
- Added Barcode Mgt to doc.box
Breaking Changes
The following Changes include changes that can possibly be breaking.
Fixed that the setup time is adjusted with the extra charge factor
When using a Standard Task Extra Charge formerly the Setup Time was increased by the Extra Charge %.
The behaviour has changed now, since a different wood type does not lead to a difference in setup time.
The standard task extra charge % has now no influence on the setup time calculation.
10299
Changed logic of group codes so that the group code is now unique for lines with different routing nos.
The production group code logic is changed, the production group code is now changed automatically if the "routing no." or "unit of measure" differs from the other lines in the production group code.
This also applies if we change the production group code manually.
10418
Changes in this release:
Workitem | Description | Functional Area |
---|---|---|
10806 | Fixed that a error appears that it is not possible to change Unit Cost on creating drop shipment purchase orders | Sales |
10848 | Fixed that the smallest quantity in Priceinfo Sales could be wrong for variants depending on item packaging setup | Sales |
3517 | Changed the document release so that checks are performed independence of document and posting type | Sales |
8273 | Added fields to better show correct values in sales invoice statistics when using prepayments | Sales |
8371 | Fixed the error on item unit of measure while changing the item over the item substitutions in a sales document | Sales |
8743 | Fixed that the availability check on release could be deactivated via the item availability notification | Sales |
9178 | Fixed the item variant filtering when the Filter on Inventory is set in Priceinfo Sales | Sales |
9433 | Changed combine shipment to skip span check to prevent issues that the span page is opening when calculating | Sales |
10060 | Added the field Harbor to the travel no and made a new view for ETA in the travel no | Purchase |
10598 | Fixed issue that a rounding message appears when using the mass calculation setting "Without Piece per Unit" for the base unit of measure | Purchase |
10808 | Added the possibility to create the lot no based on the vendor order no | Purchase |
1403 | Added support for Over-Receipt functionality in Timber | Purchase |
4828 | Added the possibility that the action change ship code is blocked if a transfer exists for a container | Purchase |
10595 | Fixed that the massline page is editable if the status is finished for a phys. inventory recording | Inventory |
10603 | Added the button parcel card (background) in the parcel selection | Inventory |
10605 | Added the field "No. 2" on the Item Card page | Inventory |
10623 | Fixed the NLD translations for the Import Ledger Entry app | Inventory |
10981 | Fixed the parcel search from the item journal line mass line page | Inventory |
2727 | Fixed the report Inventory per Lot, the header information is printed again | Inventory |
4268 | Added fields for customs information, free of duty and available after customs | Inventory |
8627 | Added the possibility to control item variation duty per location | Inventory |
9827 | Added the logic that the customer inventory receipt is deleted if the connected sales quote is deleted | Inventory |
10126 | Created the possibility that the order guidance card is printed automatically when the parcel card is printed from the prod. post output page | Manufacturing |
10265 | Fixed the sorting for the production material report on production group code | Manufacturing |
10299 | Fixed that the setup time is adjusted with the extra charge factor | Manufacturing |
10406 | Fixed the calculation of expected qty and remaining qty when calculation formula is unit | Manufacturing |
10418 | Changed logic of group codes so that the group code is now unique for lines with different routing nos. | Manufacturing |
10487 | Fixed Assembly Order to allow decimal places in the dimension of Assembly Masslines | Manufacturing |
10606 | Fixed the unit cost in the prod order line massline so that it is correctly updated and added an option to deativate cost sync on status change | Manufacturing |
10613 | Fixed that the unit cost (not base) was used when a vendor was used in the prod order component during cost refresh | Manufacturing |
10633 | Fixed the creation of the production journal with send ahead calculation forwards | Manufacturing |
10739 | Fixed BOM Components to allow decimal places in the dimension of BOM Component Masslines | Manufacturing |
10752 | Fixed empty quick finish error messages | Manufacturing |
10842 | Fixed issue that "ACAT Called from Quick Finish" was not resetted if quick finish failed | Manufacturing |
10890 | Fixed issue that is was not possible to create prod. orders from sales quotes due to certificate comments | Manufacturing |
10891 | Changed the printing of the prod order material req. report to print remaining units for masslines | Manufacturing |
251 | Added the possibility to translate the production and standard task descriptions | Manufacturing |
8021 | Fixed the error message while finishing a released prod order with an open subcontracting order | Manufacturing |
9706 | Added the material availability visibility in the production planning | Manufacturing |
10466 | Fixed that the weights are updated in the route allocation line and dispo planning after editing the document | Warehouse |
10490 | Fixed issue that it was possible to change quantity in document masslines although warehouse document existed | Warehouse |
10591 | Fixed issue that the expected piece is also resetted when changing the posting date in the phys. inventory order | Warehouse |
10746 | Fixed issue that there was an error in phys. inv. order when no masslines existed in some cases | Warehouse |
10837 | Added the print sorting as defined in the wood setup for the sales pre shipment while printing from the route allocation | Warehouse |
10854 | Added Usage Category and Application Area to Transport Units page to be available via menu | Warehouse |
11227 | Removed flowfields in Transport Units Page that caused performance issues | Warehouse |
6216 | Added the field Credit Manager Code and Credit Manager to the customer card and credit limit card and list | Finance |
10870 | Removed OnLookup trigger in Job Planning Lines | Job |
10654 | Fixed that on the Bill of Parcels report all customer comment were printed and not just shipment references | Reports |
10758 | Changed that Pre Return Receipt can now be printed from the route allocation | Reports |
11029 | Fixed parcel card printing over background job | Reports |
11030 | Fixed issue that no sales line comments are be printed from the pre invoice report | Reports |
5158 | Added totals for unit, unit volume, weights and no of parcels to reports 2.0 | Reports |
11102 | Fixed issue that the doc box preview factbox was disabled if one document is broken | DocBox |
11104 | Added Index functionality to the acadon_docbox.connector | DocBox |
10836 | Fixed issue with special characters in the rich text editor | PIM |
10862 | Added the Possibility to use the GTIN Field in addition to the EAN (EDI) Field in the EDI Process | EDI |
10875 | Added changes for intercompany processes | EDI |
10883 | Changed error handling for FTP file transfer | EDI |
11125 | Fixed GTIN only mandatory when SuppliersTradeItemId is empty for SalesInDeBouw 004 and 005 | EDI |
11130 | Fixed Mandatory parameter in inbound DESADV for OrderResponseNumber for SalesInDeBouw 004 and 005 | EDI |
11176 | Fixed mapping of wrong field for SalesInDeBouw 004 and 005 | EDI |
6687 | EDI Partner NEXMART implemented with ORDERS Export and ORDRSP Import | EDI |
8020 | Redesigned EVH manual import so that Jeld-Wen XML import is functional again | EDI |
10251 | Removed redundant ReplacePlaceholders implementation in ACADB Document Print Mgt. | Other |
10612 | Fixed wrong captions that caused filters to appear multiple times | Other |
10702 | Removed globItemSearch from Item.TableExt.al | Other |
10738 | Fixed that is was not possible to use Customer Inventory Shipment and after comma values in Cust. Inv. Massline | Other |
8852 | Added Tooltips, Guides and Tests for the Certification Module | Other |
8854 | Added Tour, Tooltips and Telemetry to Parcel Selection | Other |
9173 | Added upgrade code for WMS Extended | Other |
9826 | Added the information of customer inventory to the customer sell to factbox | Other |
10685 | Added new Event "OnAfterCheckBin" | Extensibility |
10696 | Added new event in Disp.-Send. per Doc. Tour | Extensibility |
11027 | Added events for the prod. insert comment line function | Extensibility |
11107 | Added new event in "ACADB Management" OnCreatePDFOnAfterGetReportRequestPageParameters | Extensibility |
11140 | Added events to change dynamic values formatting | Extensibility |
11183 | Changed "Description" parameter in OnAfterGetDynamicLineDescription to var | Extensibility |
11223 | Added changes to make ImportMassLines App more extensible | Extensibility |
11228 | Added Event to skip percentage codes in Certification Mgt | Extensibility |